The RS4x4HB AO is a high performance unbalanced stereo audio routing switcher in a thin profile 2RU rackmount chassis. It accepts and routes almost any 1 volt Composite (NTSC/PAL) , Y/C, or Component video input including off-the-air and non-timebase corrected signals.
The RS4x4HB accepts and routes mono or stereo unbalanced audio up to 2 volts p-p or balanced stereo audio from 0 to +18 dbm. Video and audio inputs can be routed independently; they need not have the same destination.
Each source may be routed to multiple destinations via easy-to-use front panel push buttons or via RS232 interface. Front panel LED's indicate current routed crosspoints.
Battery backed-up memory stores up to four preset patterns. An internal timer allows timed sequence of patterns.
High Performance Full Matrix Routing Switcher
|Flat to Over 100 MHZ|
|Breakaway Stereo Audio|
|Store/Recall up to 4 patterns|
|Manual and RS232 control|
|SAS (Simple ASCII Strings)RS-232 Instruction Set |
| Unbalanced Audio|
| ||Frequency Response||20 Hz to 30 KHz|
| ||Input Level||up to 2v p-p|
| ||Input Impedance||100K|
| ||Output Impedance||1K|
| ||Crosstalk||less than - 85 db at 1KHz|
| ||Audio Connectors||(64) RCA|
| || || |
| Power Consumption|
| || ||nominal 15 vdc, 500 mA max.|
| Power Connector|
| || ||5.5/2.8 mm coaxial DIN, tip negative|
| || ||19" x 3.5" x 2" deep|
Website powered by JP Claude, INC.Copyright © 2023 BroadcastStore.com. All Rights Reserved.