1:To enable a vinten pan and tilt head to be installed on a mitchell mounting,it is necessary to fit a key and spider.
KEY )2:position the key (1) in the slot in the underside of the head as shown and secure as follows:2.1 ALL HEADS EXCEPT VECTOR 700/700H secure the key to the head wtih two 5/8 in. long 6-32 UNC screws (2).
2.2 VECTOR 700/700H HEADS secure the key to the head with one 5/8 in. long 6-32 UNC screw (2) and one 1/2 in. long 6-32 UNC screw (3) ensuring the 1/2 screw is nearer the cneter of the base.
SPIDER )3:secure the spider (4) to the head with four 5/8in. long 3/8 BSW screws (5)
Website powered by JP Claude, INC.Copyright © 2022 BroadcastStore.com. All Rights Reserved.