Switch from 4:3 to 16:9 and back again, with no change of horizontal viewing angle and with 1000 pixels in both modes. The LDK 10 studio camera and the compact, lightweight and portable LDK 10P camera both offer Dynamic Pixel Management (DPM) sensors that will save you time and money.
The LDK 10 and LDK 10P employ Frame Transfer technology. You get neither lag nor smear and the highest possible linear sensitivity over all camea lens apertures.
DPM Frame Transfer sensors with 1000 horizontal pixels in 4:3 and 16:9 aspect ratios, and the same number of vertical lines in both formats
No change in horizontal viewing angle required
Simple, no compromise switching between 4:3 and 16:9
Intelligent continuous automatics - black levels, black shading and video levels
Highlight compression with a dynamic range of more than 600%
Advanced contour correction with two automatic skin settings
International standard 2/3-inch lens interface
6-position standard filter wheel cassette exchangeable on both cameras
Low center of gravity and optical path for ease of use
Short, lightweight LDK 10P portable camera with integrated triax system for EFP and stand-alone use, with or without VTR
Extensive two or four wire intercom to international standards, including RTS
LDK 10P 1.5 inch viewfinder status readout of primary camera functions
Clear scan feature enables caputer of computer and monitor pictures
Series 9000 Universal Camera Control System with optional 4:2:2 serial digital outputs from the base station
Internationally acclaimed BTS Triax system allows for cable lengths up to 2,400 meters
Digital RS 232 data transmission over the triax system for robotics and other apllications
Full range of service items and worldwide support
Series 9000 Universal Camera Control System
Optimum control with maximum flexibility, prepared for the digital revolution, Series 9000 brings the latest control technology to television production, allowing unparalleled artistic freedom.
A base station interface to the remote control system offers a built-in digital command system for the master control panel (MCP) and operational control panel (OCP), with rear-mounted connectors for all system inputs and outputs. An optional Serial Digital Video Interface card (10-bit, 4:2:2) provides complete facility for digital operation. A menu-type MCP (for cameras in groups of eight) or a Direct Access MCP (for cameras in groups of fifteen) provides control center dexterity with easy to follow and execute information on displays covering operational, maintenance and diagnostic data. Assignable Series 9000 OCP's enable remote operation of the camera (or a series of cameras), controlling iris levels and master black.
Website powered by JP Claude, INC.Copyright © 2021 BroadcastStore.com. All Rights Reserved.