Sony SVP-5600

Model Details

• Built-in Time Base Corrector
• Chroma Process Improvement
• Four Channel Audio Playback System
• Frame Accurate Editing
• Built-in SMPTE Time Code Reader
• S-video Signal Output (4-pin DIN)
• Component signal output (option)
• A TBC is essential in such system applications as A/B roll editing to eliminate VTR jitter and for the proper adjustment of phase difference. Featuring 4fsc sampling and 8-bit quantization, this TBC offers superior picture quality without any additional time base correction.
• This makes a chroma edge sharper and greatly improves the chroma band width, thus enabling sharper and clearer color picture reproduction.
• Two channels use Hi-Fi tracks and two use normal longitudinal tracks. The Hi-Fi mode provides a superb 90dB dynamic range and a wide frequency response for high quality sound reproduction. XLR type connectors are used for all four channels, allowing direct connection to professional audio products.
• In both assemble and insert editing modes precise, frame accurate video editing is possible. This is achieved by a sophisticated servo system, an improved quick response mechanism and built-in LTC/VITC time code capability.
• Time code is indispensable for precise, frame accurate editing. The reading of SMPTE standard LTC and VITC is built into the SVP-5600.
• S-Video Out connectors carries separate Y and C signals. This reduces picture deterioration due to cross color and dot interference during signal transmission.
• Power requirements: AC120V, 60Hz, 3 wire grounded receptacle
• Power consumption: 53W
• Operating temperature: 5 to 40C(41 to 104F)
• Tape speed: 33.35mm/s
• Video signal: NTSC (color) EIA(monochrome)
• S/N ratio: More than 47dB(in S-VHS/VHS mode)
• Horizontal resolution: S-VHS: More than 400TV linesVHS: More than 240TV lines
• Frequency response: Normal:50Hz to 12kHzHi-Fi: 20Hz to 20kHz
• Tape format: S-VHS or VHS
• Input: REF VIDEO IN (BNCX2,loop-through): Black burst or 1.0Vp-p,75,unbalanced,sync negative
• Outputs: COMPOSITE OUT(BNC): 1.Ovp-p, 75, unbalanced, sync negativeS-VIDEO OUT(Mini DIN 4-pinx2):Y;1.0Vp-p,75,unbalanced,sync negativeC;0.286Vp-p(burst),75, unbalancedCOMPONENT OUT(BNCX3,with optional SVBK-170):Y;1.0Vp-p, 75 unbalanced, sync negativeR-Y;0.7Vp-p,75 unbalancedB-Y;0.7Vp-p,75,unbalancedVIDEO MONITOR OUT(Super) (BNC):1.0Vp-p, 75, unbalanced, sync negative
• Dynamic range: More than 90dB(in Hi-Fi mode)
• TBC REMOTE: 15-pin multi
• REMOTE: 9-pin multi, SMPTE RS-422A standards
• WIRED SIRCS: Control-S(Power supplied type)
• FFWD and REW time: Approx. 2.5min.(with T-120)
• Search speed(with optional SVRM-100): SHUTTLE:STILL,1/30, 1/10, 1/5, 1/2, 1, 2, 10 times normal speed , forward and reverse JOG: Frame by frame, forward and reverse.
• Outputs(0dBu=0.775Vrms): Normal CH-1/2(XLR):+4/0/6dBm selectable at 600 load, low impedance, balanced HI-FI CH-1/2(XLR): + 40/-6dBm selectable at 600 load,low impedance ,balancedAUDIO MONITOR OUT(PIN):-5dBu,at 47k load, unbalancedHEADPHONE OUT (STEREO PHONE): -50 t0 -18dBu at 8 load unbalanced
• S/N ratio (Normal audio at 3% distortion, Dolby OFF):: More than 43dB
• TIME CODE OUT(BNC): 0dBu3dB at 10k load, unbalanced(0sBu=1.55Vp-p Pulse)