Sony PVM-8044Q

Model Details

Super fine pitch 8" color monitor.Features include: 450 TV lines, beam current feedback circuit, comb filter for NTSC, component inputs (Y/R-Y/B-Y or RGB or Y/C), external sync or sync on green, underscan, pulse cross, blue only, tally, AC/DC operation, front panel gain and bias controls, rack mountable, speaker, metal cabinet, worldwide TV standard (NTSC, PAL, SECAM, and NTSC 4.43), carrying handle.5 rack units high.

Features:

• High resolution 8-inch Trinitron CRT provides 450 TV lines horizontal resolution
• Beam current feedback for stable color reproduction and comb filter for improved luminance/chrominance separation
• 8-inch Trinitron CRT
• Component input (Y/R-Y/B-Y or RGB), Y/C input and composite inputs for convenience and versatility
• Pulse cross and Blue only modes
• AC or DC powered for field operation
• Accepts external sync and sync on green signal of an RGB input
• 19-inch EIA standard rack mountable (with optional MB-507)
• Compatible with NTSC, PAL, SECAM and NTSC4.43
• The PVM-8044Q incorporates a HR (High Resolution) Trinitron CRT which provides a high horizontal resolution of 450TV lines.
• Black level stability is a very significant parameter in professional monitoring because of its importance in providing stable, accurate color reproduction. To achieve this stability, the PVM 8-inch series employs a beam current feedback circuit which stabilizes the CRT drive by checking the cathode current at low light signal levels. This effectively correct the black level drift, giving stable color reproduction over a long period of time and compensating for changes in CRT characteristics.
• PVM-8044Q employ a comb filter for improved luminance/chrominance separation. This reduces cross color interference and contributes to a higher resolution.
• For maximum convenience and versatility, the PVM-8044Q has component (Y/R-Y/B-Y or RGB) inputs. This enables direct connection with equipment such as a Camera Control Unit (CCU) or a Betacam SP VTR. This ensures that a high quality for picture evaluation. Y/R-Y/B-Y or RGB input is selected via the input selection switch.
• Y/C input is standard in the PVM 8-inch series so that luminance/chrominance video signals can be input to the monitor. This minimizes cross color/dot interferences and realizes high quality video pictures.
• The PVM-8044Q has external sync inputs so that they can be synchronized with other equipment fed with the same sync signal. These monitors can also accept sync on Green signals.
• The PVM-8044Q picture aspect ratio can be selected between 4:3 and 16:9 depending on the input signal.
• In the Underscan mode the picture size is reduced and the entire active picture is displayed on the monitor. This facility allows picture edges to be observed.
• With the H/V delay mode, both the horizontal and the vertical blanking areas can be displayed simultaneously for inspection of horizontal and vertical syncs.
• The Blue only mode monochrome display allows easy VTR noise inspection and chroma/phase adjustment.
• Mode selection for Blue only, H/V delay, Underscan and External sync together with input selection can be operated from a custom-made selector when connected to the remote input with the supplied Mini Din 8-pin connector. Tally on/off can also be controlled.
• As well as operating from an AC power source, the PVM-8044Q can also be DC powered for field operation. The monitor can be operated from on or two NP-1B battery packs or a BP-90A battery pack with a DC-210 battery adaptor. When the battery becomes weak, the power LED starts blinking as a warning indication of low battery voltage. The monitor is not equipped with battery charger. To charge batteries, the appropriate battery charger for each battery type should be used.
• Bias and Gain control volumes are accessible on the front panel of the PVM-8044Q. Fine adjustment of white balance can be easily done from the front of the monitor while observing the screen.
• The PVM-8044Q is fully compatible with the three major TV standards; NTSC, PAL and SECAM. NTSC 4.43 can be reproduced as well.
• Frequency Response: 6.0MHz (-3.0dB)
• Composite: Loop-through BNC1.0Vp-p, sync negative,Automatic 75 Ohms termination
• Y/C: Loop-through 4-pin mini DINY (luminance): 1Vp-p, sync negative,Automatic 75 Ohms termination C (Chrominance): NTSC: 0.286Vp-p, sync negative,Automatic 75 Ohms terminationPAL: 0.3Vp-p, sync negative,Automatic 75 Ohms termination
• Audio power output: Monaural, 0.5W with built-in speaker
• CRT Type: 9" HR Trinitron Tube, visible picture, size 8" measured diagonally, 70° deflection, AG pitch 0.25mm
• RGB/Component: Phono -5dBu, high impedance
• External sync: Loop-through BNC4Vp-p negative,Automatic 75 Ohms termination
• Normal scan: 6% overscan
• Underscan: 3% underscan
• Convergence: Central: 0.43mm (Typical), Corner: 0.53mm (Typical)
• Synchronization: AFC time constant 1.0ms
• Humidity: 0 to 90%
• Operating Temperature: 0 to 35°C (32°F to 95°F)
• Color Temperature: 6500K (D65)
• Power Consumption: AC: 43W DC: 40W
• Color system: NTSC/PAL/SECAM/NTSC4.43 (automatically selected)
• Horizontal Resolution: 450 TV lines at center
• Storage Temperature: -10 to 40°C (14°F to 104°F)
• Speaker Out: 0.5W, 8 Ohms, monaural
• Video Signal System: EIA 525 lines 60 fields/CCIR 625 lines 50 fields (switching of EIA to CCIR or vice versa is automatically done)
• Picture Tube: 22cm (9-inch) HR Trinitron tube, visible picture size 19.7cm (8-inch) measured diagonally, 70° deflection
• H Linearity: <7% (Typical)
• V Linearity: <7% (Typical)
• Raster size Stability: H: 1.0%, V: 1.5%
• AC: 120V*20.7 to 0.4A, 50/60Hz
• Tally: Mini Din 8-pin
• Dimensions W x H x D: 85/8 x 85/8 x 14 inches
• Weight: 17lbs 3oz
• Apture Correction: -4.0dBs to +6.0dB (at 3.0MHz)
• HV Regulation: 3.0% (Cut off to High light)
• Line A: Loop-through Phono -5dBu, high impedance
• DC: 12V 3.7A
• DC: XLR 4-pin
• RGB/Component: Phono -5dBu, high impedance
• RGB/Component: BNCR/R-Y: 0.7Vp-p, 75 OhmsSync on Green/G/Y:Composite: 1Vp-p, sync neg, 75 OhmsNon-composite: 0.7Vp-p, 75 OhmsB/B-Y: 0.7Vp-p, 75 Ohms
• Line B: Composite: Loop-through BNC1/41.0Vp-p, sync negative,Automatic 75 Ohms termination
• Line B: Loop-through Phono -5dBu, high impedance

Additional Detailed Information: