The Broadcast Store - The World's Largest New and Used Full Service Pro Video Dealer.Sign In. New customer? Sign Up
Home | About Us | Contact Us| Recent Searches| New Product Catalog
0
Video Tape Mass Media Migration, Digital Migration, Digital Preservation

Amplifiers

BGW 200

BGW / 200
Image shown doesn't reflect the condition of the equipment and is for illustrative purpose only.


BCS Price: $294.00
Item #:EQ519434U
Condition:USED
Print This ProductEmail This Product
Equipment Description:
Fair Condition

Model Description:
1 RU, 110w/ch 8ohm, wide bandwidth.

Model Details

Features:
100 watt/ch @ 8 ohms
Thermally efficient aluminum construction
Heavy 3/16" aluminum front panel
Low noise toroidal mains power transformer
Front panel mounted magnetic circuit breaker/power switch
Loss-of-feedback clipping indicators
Signal presence indicators
Precision stepped attenuators
Super high speed BGW Ultracase transistors with 1600 watts total dissipation
Optional transformer balanced version
Both XLR and 1/4" input connectors
High performance active balanced inputs
Peak current limiter to prevent shutdown under shorted load conditions
Solid state DC speaker protection

Specifications:
BGW Model 200 Specifications


Total Output Power215 WattsThe total output power is the actual power out put measured during final test.Test conditions: mono operation 16 ohm load 1kHz at 0.1% total harmonicdistortion, line voltage maintained at 120 volts RMS, 60Hz. This power isequivalent to the sum of both channels when driving 8 ohm loads in stereo mode.
Output Power (dual channel)100 Watts (minunim) into 8 ohm loadSine wave continuous average power output per channel with both channels drivenover a power band from 20Hz to 20kHz.The maximum total harmonic distortion atany power level from 250 milliwatts to 100 watts is no moret han 0.08%.
Output Power (bridged mono)100 Watts (minunim) into 16 ohm loadSine wave continuous average power output driving monaural load (bridged)over a power band from 20Hz to 20kHz.The maximum total harmonic distortion atany power level from 250 milliwatts to 150 watts is no moret han 0.08%.
Intermodulation DistortionLess than 0.02% from 250mW to rated power(SMPTE method, 60Hz & 7kHz, 4:1 ratio)
Rise Time (small signal)4 Microseconds
Small Signal1Hz - 85kHz, +0,-3dB,Frequency Response20Hz - 20kHz, +0,-0.25dB,
DC Offset VoltageLess than 20 millivolts at output terminals
Hum and Noise LevelsBetter than 103dB below 100W/8 ohms(unweighted, 20Hz to 20kHz)
Input Impedance15k ohms & 240pF bal. or unbal. per channel
Input Sensitivity0.92Vrms for rated output; volt. gain=30 (29dB)
Damping Factor400:1 (ref. 8 ohms) below 1kHz
Power Requirements400 watts for rated 8 ohm power. 120, or240VAC, 50-60Hz
Dimensions:Height1.75 inchesWidth19 inchesDepth11 inches behind front panel (11.9"overall)
Weight14lbs. (6.4kg) net, 19lbs. (8.6kg) shipping
NOTES
FTC Power ratings are continuous average sine wave, both channels driven into the specified load impedance. THD values are maximum from 1 (or 2) Watt to rated output power. Measured with 120VAC power input.

Due to continuous product improvements, all specifications and features are subject to change without notice.



Notes

*An "N" after the item# denotes a NEW item. A "U" denotes a USED item.
*Prices reflect a 3% cash discount
*Please confirm your contact and shipping information is correct
*All prices are based on cash payment
*All preferred shopper prices are good until the end of the month
*Orders taken after business hours will be processed the next business day
*Service contracts available for extra charge
*Lease Prices are based on a 36 month lease
*All shipping is UPS ground service unless otherwise requested

  Click for the BBB Business Review of this Computer Software Publishers & Developers in Chatsworth CA

Sign In

Email:
Password:
Forgot your Password?