The Broadcast Store - The World's Largest New and Used Full Service Pro Video Dealer.Sign In. New customer? Sign Up
Home | About Us | Contact Us| Recent Searches| New Product Catalog
0
Banner1a

Amplifiers

CROWN D-75A

CROWN / D-75A
Image shown doesn't reflect the condition of the equipment and is for illustrative purpose only.


BCS Price:Click Here to Contact Us
Item #:EQ509316U
Condition:USED
Print This ProductEmail This Product
Model Description:
25W/Ch 16 Ohms, 40W/Ch 8 Ohms, 55W/Ch 4 Ohms, 110W Bridged Mono 8 Ohms, 80W Bridged Mono 16 Ohms

Model Details

The D-Series of Crown professional
power amplifiers are used wherever
audio is found - in the lab, on the road,
in the home and in the studio - they
are standards for moderate power applications
such as recording or broadcast
studio nearfield monitoring, video
suite audio monitoring, a recording/
broadcast studio headphone amp or
a small paging system. Designed,
built and carefully checked to ensure
reliable operation with a wide variety
of loads, their high reliability is particularly
important in reducing maintenance
costs.

25W/Ch 16 Ohms,
40W/Ch 8 Ohms,
55W/Ch 4 Ohms,
110W Bridged Mono 8 Ohms,
80W Bridged Mono 16 Ohms



Specifications:

SONIC PERFORMANCE

(Note: the following performance

measurements were made in Dual mode

with both channels driven into an 8

Ohm load).

Signal/Noise:

Damping Factor: >400 from DC to

400Hz.

Controlled Slew Rate: (Slew rates are

limited to useful levels for ultrasonic/Rf

protection) >6V/ms.

IMD: <0.01% At Rated Output.

THD: <0.001% from 20Hz to 400 Hz.

increasing linearly to 0.05% at 20Khz.

Frequency Response: ±0.1dB from

20Hz to 20 KHz at 1 watt.

Phase Response: +10° to -15° from

20Hz to 20KHz at 1 watt.

Input Impedance: Nominally 20 KOhm

balanced, and 10KOhm unbalanced.

Output Impedance: <15mOhm in series

with <3mH.

CONTROLS & INDICATORS

Front Panel: On/Off Switch, Level

Controls, Enable, Signal, IOC indicators.

Internal: Dual/Mono jumper.

CONNECTORS

Input: Balanced Three-Pin Female

Neutrik® Combination XLR and 1/4 inch

Phone Connector for Each Channel.

Output: A Four-Terminal Barrier Block on

the back panel,and a stereo headphone

jack located on the front panel. Headphone

jack is unpadded and in parallel

with the main outputs.

STRUCTURAL

Weight: Net 10 lbs.

Dimensions: 1.75” x 19” x 8.38”

Cooling: Convection.

AC Power: 120V 60Hz. (North America)



Additional Information

15198.pdf
crown_d-75a.pdf

Get Adobe PDF Reader

Notes

*An "N" after the item# denotes a NEW item. A "U" denotes a USED item.
*Prices reflect a 3% cash discount
*Please confirm your contact and shipping information is correct
*All prices are based on cash payment
*All preferred shopper prices are good until the end of the month
*Orders taken after business hours will be processed the next business day
*Service contracts available for extra charge
*Lease Prices are based on a 36 month lease
*All shipping is UPS ground service unless otherwise requested

  Click for the BBB Business Review of this Computer Software Publishers & Developers in Chatsworth CA

Sign In

Email:
Password:
Forgot your Password?