|Image shown doesn't reflect the condition of the equipment and is for illustrative purpose only.|
|BCS Price:|| $2,150.00 |
Compact Rack Mounted LCD Monitors
Model DetailsThe RM-2440 is a multi-display color video monitor featuring four 4" (100mm) Active Matrix TFT LCD displays in a 2U rack-size.
Each LCD is back lit with a cold cathode fluorescent tube.
The LCD displays are mounted in a cylinder, which allows the operator to rotate the display array ±55° in the vertical plane to provide optimum operator viewing angles.
Each LCD display has separate controls for brightness, contrast, color, and tint (NTSC only).
The standard RM-2440 features two selectable composite analog (CVBS) video inputs per LCD display for a total of eight inputs (NTSC and PAL auto-sensing).
One of the two inputs (per display) is selected using a front panel A/B switch.
Each of the eight CVBS video inputs has a passive loop-through on a BNC connector and a 75 Ohm/Hi-Z termination select switch.
SDI or HD/SD-SDI signals may be monitored with installation of one of three field-installable input options (one per display).
These input modules are easily installed to input connectors on the rear panel.
Each installed option disables the second (or B) CVBS video input in the section in which it is installed.
The RMSDI-1 accepts SD-SDI video signals, while the RMHD-2 accepts either HD-SDI or SD-SDI signals.
Both feature an input, buffered output, and CVBS video output (converted from the input) on BNC connectors, signal lock LED, and auto-sensing of PAL/NTSC signal formats.
A third option, the RMSDI-1, is identical to the RMHD-2, except that it lacks the SDI output and requires manually setting a switch for NTSC/PAL formatting.
Selection of the option(s) is accomplished by setting the front panel A/B switch to "B". Each display also features a tri-color (red/green/yellow) tally LED indicator.
A DB-25 connector on the rear panel is used to interface the RM-2440 with your facilities tally system.
An optional field-installable audio indication module (AIM-1) can be plugged into the tally connector in order to use the RM-2440 tally LEDs for indication of audio presence and loss.
Additional InformationRM-2440- data sheet.pdf
Get Adobe PDF Reader
*An "N" after the item# denotes a NEW item. A "U" denotes a USED item.
*Prices reflect a 3% cash discount
*Please confirm your contact and shipping information is correct
*All prices are based on cash payment
*All preferred shopper prices are good until the end of the month
*Orders taken after business hours will be processed the next business day
*Service contracts available for extra charge
*Lease Prices are based on a 36 month lease
*All shipping is UPS ground service unless otherwise requested
Website powered by JP Claude, INC.Copyright © 2017 BroadcastStore.com. All Rights Reserved.