The Broadcast Store - The World's Largest New and Used Full Service Pro Video Dealer.Sign In. New customer? Sign Up
Home | About Us | Contact Us| Recent Searches| New Product Catalog
0
Videotape Transfer to Digital files, Mass Media Migration

Monitor Color Monitor

Ikegami TM14-17RA


BCS Price: $2,314.00
($74.23/mo.)
Item #:EQ422265N
Condition:NEW
Print This ProductEmail This Product
Model Description:
14" monitor

Model Details

Ikegami 17 Series are High performance, Low cost color Monitors, providing NTSC-PAL automatic selection. The units are specifically designed for production or broadcast applications and provide high-fidelity video reproduction with easy operation, utilizing In-Line Gun CRT technology, BFS circuits, and Comb filter (NTSC only).
The 17 Series Color Monitors can accept 2 composite video, Y/C, and RGB or Component inputs in both NTSC and PAL formats. Furthermore, Digital Inputs (D1, D2, D3 formats) are available with optional modules

serial digital interface card - add 1550



Features:

Features
Cathode Ray Tube

  • In-line Self Converging Electron Gun assures convergence stability.
  • Black Mattix surrounding CRT face assures high contrast under bright ambient lighting.

    Circuitry

  • NTSC-PAL mode selection
  • Screen aspect ratio of 4:3 or 16:9, with front panel switchable.
  • BFS (Beam Feed-Back System) provides long-term Black Level stability.
  • Pre-set Controls: Hue (NTSC Only), Chroma, Y/PB/PR Chroma, Brightness, Contrast
  • Comb Filter provides wide band luminance, switchable to notch filter at front panel (NTSC only).
  • Sweep failure protection circuit prevents phosphor bums.

    System Conveniences

  • 4 Video Inputs (A/B/YC/RGB or Y, PB, PR), with front panel switchable.
  • Digital Inputs (DI or D2 and D3 formats) are available with optional modules.
  • Horizontal Time Constant can be selected in either 0.5msec. or 2msec.
  • 13V and 19V Rack mount units available.

    Test Facilities



  • Specifications:
    GENERAL
    Input Voltage 100V-120VAC ± 10%, 50/60Hz, Single Phase
    200V-240VAC ± 10%, 50/60Hz, Single Phase
    (switchable from the internal connector)
    Power Consumption Approx. 60W
    Ambient Temperature 0-40°C (32- 104°F), 90% or less relative humidity
    (non-condensing)
    Dimensions (WHD) TM20-17RA/RPA: 450 X m x 515mm (17.7 x 15.7 x 20.3in)
    Weight TM20-17RA/RPA. Approx. 28kg (61.8 lbs.)
    RATING
    Input Signal Video: 2 inputs
    Y/C: 1 input
    RGB/Y, Pb, Pr: 1 input * Switchable at Rear Panel
    Digital Video: 1 input (Option)
    Sync: 1 input
    Input Level Video Signal:
    Composite 1.0 Vp-p
    Non Composite 0.7 Vp-p

    Y/C signal:
    Y signal 1.0Vp-p
    C signal 0.286Vp-p (burst level)

    RGB or Y, Pb, Pr:
    (RGB Signal)
    G signal 1.0Vp-p (Sync on Green) or 0.7Vp-p
    R/B signal 0.7Vp-p
    (Y, Pb, Pr signal) N10/SMPTE Format
    Y White: 0.7Vp-p
    Setup: 0%
    Sync: 0.3Vp-p
    Pb, Pr: 0.525Vp-p

    Digital Video (D1, D2, D3):
    Serial: 0.8Vp-p ± 10%

    Sync Signal: Composite Sync 4Vp-p ± 2Vp-p
    Connection Video/RGB or Y, Pb, Pr:
    Bridging BNC connectors, high impedance with 75ohm termination plug
    Y/C:
    4pin plastic connector, single end. 75ohm terminated
    (7pin metal connectors are OPTION)
    Remote Controls Parallel Remote:
    1. Video input select (A/B/YC/RGB or Y, Pb, Pr/Digital)
    2. COLOR/MONO select
    3. Tally (ON/OFF)
    4. 4:3/16:9
    5. (Parallel Remote:Unusable except for Tally, in case of Serial Remote operation.)
    Serial Remote (Option):
    1. Video input select (A/B/YC/RGB or Y, Pb, Pr/Digital)
    2. COLOR/MOMO select
    3. Sync INT/EXT
    4. Blue only ON/OFF
    5. Comb/Trap
    6. Apt ON/OFF
    7. 4:3/16:9
    8. Nor/Underscan
    9. Delay (PCR) ON/OFF
    10. Degauss ON/OFF
    PERFORMANCE
    CRT TM20-17R/RPA:
    In-line gun, Slot-shadow mask, high resolution CRT
    Mask Pitch TM20-17RA/RPA(19V): 0.43mm
    Resolution (at center) TM20-17RA/RPA (19V): 600TV lines or more
    VIDEO SIGNAL SYSTEM
    Frequency Response Measured with Aperture Gain 0, (notch filter OFF)
    50Hz - 7MHz; flat with in +1/-3dB (referred to 100kHz)
    Pulse Response At each RGB amplifier output with 0.05 micro-sec.
    rise time square wave video input
    Overshoot 10% or less (at 250kHz)
    Sag (Tilt): 5% or less (at 50 Hz)
    Chrominance Rejection Ratio Less than -24dB (with aperture correction 0, notch filter ON)
    Aperture Correction Waveform of Overshoot of 2T pulse appear symmetrically with notch filter ON
    Noise Coherent noise Less than -40dB
    Other noise Less than -50dB
    COLOR SIGNAL SYSTEM
    Demodulation Axis R - Y, B - Y system
    Frequency Response NTSC: 3.58MHz ± 0.5MHz +1/-3dB
    PAL: 4.43MHz ± 0.5MHz +1/-3dB
    (measured at chroma output test point)
    Demoduration Axis Phase Error 90° ± 2°
    SYNC SYSTEM
    Sync Stability Stability of synchronization will be met for the following conditions
    a) Internal Sync Video input level within ± 6dB
    against the rated value of 1.0Vp-p b) External Sync Sync Signal Input leveI of 0.3-8.0Vp-p
    AFC Time Constants SLOW. Approx. 2.0msec.
    FAST. Approx. 0.5msec.
    DEFLECTION SYSTEM
    Scanning Frequency
    Horizontal Nominal 15.734kHz (NTSC); 15.625kHz (PAL)
    Vertical Nominal 59.94Hz (NTSC); 50 Hz (PAL)
    ScannIng Amplitude
    NORMAL SCAN
    (adjustable)
    Overscan is 1% of CRT effective area with an aspect ratio of 4.3
    UNDER SCAN
    (adjustable)
    Four comers are visible within boundary of effective area
    with an aspect ratio of 4:3 or 16:9
    Geometry and Linearlty Less than 2% of picture height
    Convergence Error
    Center Inside a drcle with diameter of 8O% of picture height Less than 0.5mm
    Corer Outside area of picture center; Less than 0.9mm
    HIGH VOLTAGE
    Tolerance 24kV ± 1kV
    Regulation ± 5% over the range of 0-450 microA referred to 150 microA
    OPTION
      SF-171 Serial remote and Y/C Input 7 pin connector
    DK-173 D1 SDI Input Kit
    DK-174N D2/D3 NTSC SDI Kit
    TTM-20 Slides rail and A-TM20-16 Rack metal
    SRC-301 Serial Remote Controller (BNC connector control)


    Additional Detailed Information:

    Ikegami 17 Series are High performance, Low cost color Monitors, providing NTSC-PAL automatic selection. The units are specifically designed for production or broadcast applications and provide high-fidelity video reproduction with easy operation, utilizing In-Line Gun CRT technology, BFS circuits, and Comb filter (NTSC only).
    The 17 Series Color Monitors can accept 2 composite video, Y/C, and RGB or Component inputs in both NTSC and PAL formats. Furthermore, Digital Inputs (D1, D2, D3 formats) are available with optional modules.



    Additional Information

    Ike_TM14-17RA.pdf

    Get Adobe PDF Reader

    Notes

    *An "N" after the item# denotes a NEW item. A "U" denotes a USED item.
    *Prices reflect a 3% cash discount
    *Please confirm your contact and shipping information is correct
    *All prices are based on cash payment
    *All preferred shopper prices are good until the end of the month
    *Orders taken after business hours will be processed the next business day
    *Service contracts available for extra charge
    *Lease Prices are based on a 36 month lease
    *All shipping is UPS ground service unless otherwise requested

      Click for the BBB Business Review of this Computer Software Publishers & Developers in Chatsworth CA

    Sign In

    Email:
    Password:
    Forgot your Password?