The BOW Model 432 Series of tape cleaners are economical magnetic round reel tape cleaners with high quality wind for 1-inch and Â½-inch NAB, IBM or EIAJ spindle reels. The Model 432 was designed to handle tape reel sizes from 10 Â½-inches to 16-inches in diameter, all computer/data reels (432C) up to 10 Â½-inches, as well as video tape (Model 432V) 5 and 7 inches in diameter. An optical inspector option is available that allows the user to establish a fail criteria to weed out bad tapes and save valuable reusable tapes. Perfect for conditioning old tapes for archives, restoration, or to ready the tape for media transfer. In conjunction with the optical inspector, a stop on defect feature allows the operator to visually inspect any physical defects found on the tape. For the best high quality wind magnetic reel-to-reel tape conditioner for your valuable tapes, the BOW Model 432 is the solution. FEATURES CLEANING EFFICIENCY The BOW Model 432 incorporates the safest and most effective method of cleaning tape, with a sapphire blade for removing dirt adhered to the tape, and cleaning tissues stations for removal of any loose dirt. BOW's unique pivoting cleaning blade design simplifies blade contact with a double-edged sapphire blade for scrapping the tape in both directions of travel. If desired, the operator can retract the cleaning blade from the tape path entirely for 'tissue only' cleaning. The automatically advancing tissue stations are made of non-shedding nylon material that are placed such that both the oxide and back sides of the tape are cleaned, both upstream and downstream of the sapphire blade. For optimum efficiency, the BOW Model 432 allows the operator to select tissue speeds (FAST, MEDIUM or SLOW) according to the amount of dirt on the tape. PACK ROLLER A frequent problem for tape users is edge damage caused when protruding layers of a scattered wind contact the reel flanges. The Model 432 features a large pack roller that prevents scattering and centers the tape uniformly on the reel hub without touching either flange. SPEED Because of aerodynamic effects of the tape at the cleaning blade and tissue stations, the best speed for cleaning effectiveness is approximately 300 ips (inches per second) in both forward and reverse direction. If tape stiction is an issue, we offer the Selectable Speed Modification (SSM) that allows the tape speed to be lowered and selectable between 75 ips and 150 ips. HUBS The NAB hubs require a simple push-in motion, which extends three fingers that push the tape reel back securely against the hub's back flange. This assures straight alignment and safe seating for every reel. The IBM hubs function the same except they use bands that swell to hold the IBM reels securely. The spindle hubs (EIAJ) used for Â½-inch video reels (432V) use a two piece sliding mechanism that allows for quick and easy installation and removal from the hubs. BLADE LIFE INDICATOR The sapphire cleaning blade will stay sharp for at least six million feed of tape. The Model 432 keeps track and indicates in percentage the amount of life remaining so that a sharp edge is always assured. Test22-22
Efficiently Cleans 1/2-inch or 1-inch Instrumentation, Computer, Audio & Video reel tapes
Four cleaning stations clean both sides of the tape
Variable cleaning tissue speed control
Self-test feature for easy trouble shooting
Various hub types available
Blade Life Indicators
Optical Inspection option
Hub Conversion Kits Available Test 33-33 before last HTML codeSpecifications:
Additional Detailed Information:ORDERING INFORMATION
432 C, H, T, V: 20" H x 24" W x 17.25" D overall
432 I & W: 26" H x 34" W x 15.75" D overall
432 C, H, T, V: 50 lbs. (approx.); 432 I & W: 75 lbs. (approx.)
110-240 VAC +\-10%, 50/60 Hz ( 6.25 amps @ 115 VAC; 4 amps @ 220 VAC)
Pushbuttons for POWER, LOAD, FORWARD, REVERSE, CYCLE, STOP, SYSTEM TEST and TISSUE SPEED.
REPLACE BATTERY, SYSTEM TEST, BLADE LIFE (NEW, 1/3 & REPLACE), TISSUE SPEEDS. (FAST MEDIUM & SLOW), LOAD, FORWARD, REVERSE, STOP and CYCLE.
4 1/2 digit counter display, 1% accuracy, 1 ft. resolution.
Tape Low Sensing
Senses when tape is low on supply reel to allow tape to slow before stopping or reversing direction. This is adjustable.
Automatically returns tape to the left reel.
Tape Absence Sensing
Stops tape drive when tape is not present in tape path.
Presses air from tape layers to provide a uniform stack on the left reel.
Hubs & Guides
Precision locating, positive locking, and maintenance free guides. Guides rotate on ultra precision bearings to provide minimum tape wrap and maximum guiding.
REEL DIA. (MAX)
10 1/2 inch
10 1/2 inch
10 1/2 inch
|432V||EIAJ Spindle||7-inch||1/2 inch||6-7 oz.|
Conversion Kit from 1/2-inch NAB to IBM
|CKV||Conversion Kit from 1/2-inch NAB/IBM to 1/2-inch Video (EIAJ)|
|SSM||Selectable Speed Modification - Allows tape speed to be lowered and selectable between 75 ips and 150 ips|
|OI||Optical Inspector with Stop on Defect |
|SDS||Stop Distance Select - Stops machine at selected distance from either end of tape.|
Website powered by JP Claude, INC.Copyright © 2018 BroadcastStore.com. All Rights Reserved.