The new PSC AlphaMix contains all of the features required by today's demanding ENG recordist. Do you regularly do two camera shoots, work with demanding producers or have complicated IFB feeds? Then the new PSC AlphaMix is for you. This all new design contains four inputs each with switch-able line or microphone level inputs, 12T or 48PH microphone power, low noise pre-amplifiers with continuously variable gain trims, active 12dB/Octave low cut filters, balanced line level outputs per input channel, pre-fader-listens and simple three LED meters per input channel.
The PSC AlphaMix is the only mixer to offer internal NP-1 battery powering! That's right the new PSC AlphaMix will accept any NP-1 style battery and is equipped with selectable low battery monitoring. In addition, the PSC AlphaMix is equipped with four industry standard Hirose TM 4 pin power output connectors that allow the AlphaMix to power up to four wireless receivers. And unlike other external battery distribution boxes, each of the AlphaMix's power outputs is individually filtered for quiet wireless operation. The AlphaMix was also designed from day one to feed and monitor audio returns from two cameras. The Alphamix's outputs include special, custom made, dual isolated output transformers that are the largest in the industry! They are in fact twice the size of our competitors output transformers!
The AlphaMix is the only mixer to offer two-camera support using two identical 10 pin Hirose TM connections. This means you will not have to have two different styles of Betasnake cables and as we all know, redundancy is a good thing. The PSC AlphaMix also utilizes a custom-made peak reading LCD meter that emulates most of today's cameras. For further convenience, the AlphaMix is equipped with a boom pole mounted remote control that can be used to control the gain of the first input channel, thus allowing the operator to boom with both hands.
Four line or microphone level switch-able inputs.
12T and 48PH microphone powering to DIN specs.
PSC Exclusive: Very low noise (1nV/root of the Hz) pre-amplifiers.
Active 12dB/octave low cut filters.
Retractable gain trims on each pre-amplifier.
Retractable pan pots.
Individual balanced outputs per input channel.
PSC Exclusive: Individual 3 LED meters per input channel.
Pre-fade listens per input channel.
PSC Exclusive: Boom pole mounted remote control slide fader allows booming with two hands.
PSC Exclusive: Custom made (properly sized) dual isolated output transformers.
PSC Exclusive: Two Hirose 10 pin connectors for easy dual camera support, line or mic level switch-able.
Two 3.5mm stereo auxiliary outputs, line or microphone level switch-able.
Two XLR balanced outputs.
Output limiters, switch-able separate or ganged.
PSC Exclusive: Additional output that provides balanced mono feed.
4 pin Hirose external power input.
PSC Exclusive: Internal NP-1 battery support.
PSC Exclusive: Built in 4-way power distribution for wireless receivers.
Built in slate microphone.
Built in reference tone oscillator.
PSC Exclusive: Built in battery monitoring, switch-able calibration for all NP-1 battery types.
PSC Exclusive: Custom made peak reading LCD meters that emulate the camera's meters.
Switch-able headphone monitoring left, stereo, right, mono, MS as well as tape returns from 2 cameras.
Aircraft aluminum housing with epoxy powder coat finish.
PSC Exclusive: Lexan overlays with wear-proof subsurface silk-screening.
Porta Brace case and strap included.
One year limited warranty.
Exceptional after sales support.
Additional Detailed Information:
|Size||10.5" x 7" x 2.2"|
|Weight||4 Lbs||Distortion||0.04% THD|
|Signal to Noise||130dB EIN A weighted||Gain Trims||40dB, retractable|
|Mic Powering||12T and 48PH to DIN specs|
|10 to 18Vdc|
|Low Cut Filter||12dB/octave, 80Hz, 140 Hz||Limiter||1mS attack, 100mS release|
|Batteries||NP-1, any voltage or chemistry||Warranty||One year limited|
Website powered by JP Claude, INC.Copyright © 2018 BroadcastStore.com. All Rights Reserved.