This distribution amplifier drives multiple isolated
line feeds from a single input source.
The DA-2 is ideal for driving lines to multiple
amps in live sound applications, distributing
audio to multiple tape decks, feeding stereo signals
to multiple zoned locations, etc.
This 1U stereo audio distribution amplifier features
four outputs per channel. Each output is ground
lifted and has its own level control and clip
indicator light. Input signals are monitored by
signal-present LEDs and clip LEDs. The headphone
circuit can be switched to monitor either channel.
A combine switch applies both inputs to all 8 outputs,
making the DA-2 a one-or two-in, eight-out DA.
All audio connections are made through actively
balanced line level XLR connectors.
Frequency Response: 20Hz-20kHz ±0.3dB
Maximum Input level: +22dBu
Input Impedance: 1M Ohm
Common Mode Rejection: 90dB at 60Hz
Maximum Output Level: +22dBu
Output Impedance: 112 Ohm
S/N at 0dB Input, 0dB Gain: 87dB
Rise Time: 3µS
Total Harmonic Distortion: 0.004% @ 1kHz
Output Channel Separation: 74dB
Headphone Impedance: 75 Ohm minimum
Channel Output Gain: 18dB
Power Requirements: 115/230VAC
Website powered by JP Claude, INC.Copyright © 2017 BroadcastStore.com. All Rights Reserved.