Sony HKPF-1125

Model Details

HD Up Converter Board. Installs into PFV-HD50A or PFV-HD300 frames. Upconverted signals which can be converted to 1080i HD are NTSC Composite, SDI composite and SDI Component. Provides distribution (3 outputs) as well as conversion. Remote control capable with HKDV-503 remote controller.

Features:

• Conversion of SDTV to HDTV in one board.
• 525 component or NTSC composite serial digital input and NTSC composite analog video input.
• Maintains audio signals embedded in SDI input with audio/video synchronizations.
• Three distribution outputs of HD SDI with embedded audio.
• 525 Black Burstt or 1125 Tri-level Sync input with a passive loop-through output (75W termination ON/OFF Switch).
• 1035 or 1080 active lines outputs switchable (59.94Hz field frequency fixed).
• Auto colorimetry selection between 1035 and 1080 active lines (SMPTE 240M and ITU-R BT.709).
• Motion adaptive and non-adaptive conversion modes selectable from Frame/Field adaptive, Field fixed and Frame fixed.
• Aspect ratio modes selectable from Squeeze, Letter Box and Edge Crop.
• Controlled from the optional HKVD-503 Digital Video Controller via RS-422 (GPI also provided).
• ISR (Interactive Status Reporting)
• Digital Signal InputVideo In D1/D2 SDI Connector: BNC type (x1), 525 component or NTSC composite serial digital signal conforming to SMPTE 259M-A/C, 143Mbpsor 270 Mbps, 75W, unbalanced
• Video In Analog Connector: BNC type (x1), NTSC analog composite video signal 1.0Vp-p, 75W, unbalanced
• SYNC Signal InputRef In Connector: BNC type (x1), 1125 tri-level sync signal conforming to BTA-S001 or 525 Black Burst signal.
• Loop-Through Output Connector: BNC type (x1) with 75W termination switch
• Digital Signal OutputDigital Out 1,2,3 Connectors: BNC type (x3), HD serial digital signal conforming to SMPTE 292M, BTA S-004B
• Remote Control InputRemote In Connector: D-sub 9-pin (x1)
• Power Requirements: +5V DC: 3.0A, -5V DC: 0.7A (supplied from the PFV-D/HD Series Interface Unit)
• Power Consumption: Approx. 18.5W
• Operating Temperature: 41°F to 104°F (5°C to 40°C)
• Dimensions: Board: H x D: 194 x 310mm Connector Panel: H x D x W: 218 x 98 x 25mm
• Weight: Board: Approx. 1lbs. 8.7oz. (700g)Connector Panel: Approx. 10.6oz. (300g)

Additional Detailed Information:
Features

• Conversion of SDTV to HDTV in one board.
• 525 component or NTSC composite